Plate Flipper / Fender eliminator :- R6

[Will]

Hi Guys,

I was wondering where do i start looking for a package that can fender eliminate but can also plate flip if i want.

Did a search but couldnt come up with much that comprimises both of the above.

Cheers,
Will.

[j-rad]

You want to do this:

Go to Jaycar > buy a remote control servo motor for around 35-50.
9V Battery
Paperclip
Some Electrical wire
LED light + contact
Switch

Attach the servo motor to your Licence plate via the paperclip and wire to the 9V battery. You will need to cut a few small holes for the paperclip.

Put the switch & LED on your handle bars and run the wires to it. Place the contact on the top side of the plate so that when the motor 'flips' it down the metal makes contact, turning on the LED light to tell you the plate has 'fallen down'.........

I'm not saying you should do this for any other reason other than for use at the race track :lol: but do what you will with the info!!

the instructions are not complete but you should be able to see what I'm getting at

[Will]

Thanks J. I will looks into it.

[j-rad]

I've 'heard' that once the 'XXXXX' have your license plate they will stop pursuing you in the event of somesort of 'pursuit' so if there's another plate on the back of your other one you'll still have A plate on there.......or, if as I suggested it's just for track use - WHEN ever you decide to have a quick run, just hit the plate automatically so no need to think of it in the heat of the moment.....

but yeh, this is more a track mod only and is the fastest method of changing it, short of completley removing it for the track..... :ayyy: