StGeorge MCC Rnd1 - Wakefield Park 18/04/10 - Info

[HYPE]

http://farm3.static.flickr.com/2777/4517029536_ebc15f6481_b.jpg

http://farm5.static.flickr.com/4007/4517027950_7e5ee9958f_b.jpg

http://farm5.static.flickr.com/4037/4517029310_c74a6eb10f_b.jpg

http://farm5.static.flickr.com/4046/4516393781_fcab814848_b.jpg

http://farm3.static.flickr.com/2754/4516393235_3b3cb7579c_b.jpg

[Kris]

Garage 24, sweet.. cant see Marshy on there???

I think if i pick up the track on sat id have a go at the race, only issue is lack of lockwiring :(

[*Oggy*]

Wade... What class would my 600 for in ??? Are any of the mods make it ineligable ????

[Kris]

Thinking of joining Oggy? :) More the merrier!!

[HYPE]

Garage 24, sweet.. cant see Marshy on there???

I think if i pick up the track on sat id have a go at the race, only issue is lack of lockwiring :(

bring a drill, i have pliers & wire

make sure you have drain plugs fitted to belly pan

and a clamp for the oil filter

Micheal (WRP) can sell you race numbers if needed

[Kris]

How are you going to drill my caliper bolts? :P

Drain plugs? nup dont have that. Clamp for filter? nup dont have that either!

Hype, hop on Facebook chat

[HYPE]

Wade... What class would my 600 for in ??? Are any of the mods make it ineligable ????

CLUBSPORT 600;

For 600cc 4 stroke machines, manufactured before 12th month 2003, and able to be raced by all grades, at club level only.

not sure about you having 05/06 triple/fork ???

[HYPE]

How are you going to drill my caliper bolts? :P

with a drill!


Drain plugs? nup dont have that.

i could bring a couple if needed


Clamp for filter? nup dont have that either!

$3 @ bunnings (jubilee clamp)

http://farm4.static.flickr.com/3574/3512533468_b89eaf536e.jpg

and get some spare drill bits

http://farm4.static.flickr.com/3572/3512533234_53a70fc216.jpg

[Linden]

Day licence are available

[Kris]

HYPE, if you can bring the plugs,wire, tool etc that would be good. So a few decent 1" bits and my cordless drill? Its all I got.. 2 batterys, 14.4Volt. Is it tough shit to drill? Ill take a spare oil filter to bunnings and get a clamp, where does it go? around it?? I dont get it

[nutsa]

1/16 inch bits or 1.5 - 2mm would be my guess Kris, bit smaller than 1" haha

[*Oggy*]

Thinking of joining Oggy? :) More the merrier!!
Maybe one I've settled in on the 600. Hope you or Wade can ask about the 06 front end I have.

[*Oggy*]

How are you going to drill my caliper bolts? :P

Drain plugs? nup dont have that. Clamp for filter? nup dont have that either!

Hype, hop on Facebook chat
Chat with Slowbro . Pretty sure I saw his 600 was all lockwired. He might want to swap his drilled set for your virgin ones ????

[HYPE]

HYPE, if you can bring the plugs,wire, tool etc that would be good. So a few decent 1" bits and my cordless drill? Its all I got.. 2 batterys, 14.4Volt. Is it tough shit to drill? Ill take a spare oil filter to bunnings and get a clamp, where does it go? around it?? I dont get it

no prob.

the clamp simply tightens around the filter and the wire anchors it.

(caliper bolts / sump bolt / oil filter / oil filler cap / radiator cap)

now! ... does you bike have a 'shark fin' on the underside of the swingarm infront of the chain/sprocket ????

[Stu23]

unfortunately my 600 clubsport missile will not be ready as wifey dropped it at EC......not happy......nothing major at all but getting bits is a pain in the arse !!!! Will be down to look on Sunday anyway.good luck to you all, will be out racing with you next time :)

Stu

[HYPE]

bad luck Stu... i hope she doesn't burn your dinner as well

i'm 'last minute racing' myself... the fairings are being painted today... still to sort out the clutch, lockwire it all up, fit the fin, etc etc...
newer bike but slower than the old one .. guess i'll have to learn to ride it on saturday

[Dean93]

Stu, make sure you wander down to garage 33.

Kris, stop fartarsing around, set the bike up now and register before the weekend, you won't look back.

[Stu23]

was just gunna say let me know what garages your all in and ill call in for a look see and a chat

[Linden]

HYPE, if you can bring the plugs,wire, tool etc that would be good. So a few decent 1" bits and my cordless drill? Its all I got.. 2 batterys, 14.4Volt. Is it tough shit to drill? Ill take a spare oil filter to bunnings and get a clamp, where does it go? around it?? I dont get it

from Thread -Race-preperation-questions (http://nswroadandtrackbikes.com/forums/showthread.php?14925-Race-preperation-questions)

http://farm5.static.flickr.com/4035/4485460206_a20932b4a2.jpg

Is it tough shit to drill? - calliper boots are high tensile Steel - yes its tough - I suggest you whip them off and down to your nearest bloke with a drill press (bring your own bits)

[Linden]

Kris

Can you drop down to Hurstville Forest and hudson rds - I've got a preped bike here to day (and 1 other day this week) can show you through

as to sharks tooth I've seen Ice Cream containers held with cable ties get passed :eyecrazy:

[Linden]

Bugger just seen that Unlimited v-twin is in with Unlimited A Grade ... please be gentle boys

[Cedric]

It can be done easily yourself with some sort of cutting compound, numerous drill bits and patience.. Drill press is far easier though.. Took me best part of an hour to drill thru all the bolts required for lockwiring..

[WET4URacing]

kris just get whittney to do it

[Kris]

Paul, Whittney did it this afternoon :) :) :)

He snapped about 343434 drill bits doing it, but they are all done! Ill buy myself some lock wire and a tool tomorrow at MCAS, I'll need to do it myself

HYPE, whats this about sump drain plugs? Yes, my bike has a shark fin fitted. Ill drop the coolant tomorrow night and install the oil filter clip etc

Ill bring the bike prepped, as for if ill try my hand at a race is yet to be determined. Never ridden this track before and the bike Whittney tells me is competly different now. See how i go - ill get the choice anyway, im sure if i register last minute ill be allowed in ;)

[Kris]

from Thread -Race-preperation-questions (http://nswroadandtrackbikes.com/forums/showthread.php?14925-Race-preperation-questions)

http://farm5.static.flickr.com/4035/4485460206_a20932b4a2.jpg

Is it tough shit to drill? - calliper boots are high tensile Steel - yes its tough - I suggest you whip them off and down to your nearest bloke with a drill press (bring your own bits)

Im all sorted, Whittney (thanks mate) did it with a cordless on the bike ;)

Thanks for the offer Linden!

[jonoZRX]

Garage 24
Nope, that garage has got me, Lachie, Craig and Mark. Garage allocations are on the left of your name - you don't seem to have one.

[Linden]

HYPE, whats this about sump drain plugs?


http://farm5.static.flickr.com/4009/4485466282_f3ea963ccd.jpg
sump plug ... normally soft brass

might want to read the race prep thread

[Linden]

Nope, that garage has got me, Lachie, Craig and Mark. Garage allocations are on the left of your name - you don't seem to have one.

They are race day allocation ... and he aint enter ...............................YET

[HYPE]

HYPE, whats this about sump drain plugs?

not sump!

Belly-Pan plugs (the removable rubber bungs)

[Kris]

Thats what i meant! Plugs.. whats that for? Isnt the idea to keep the fluid in the pan, id rather remove the pan to empty it then drill holes in it for some bung

Gotcha re: garage. So on the prac day, im assuming there is power for warmers or do I need to pay for a garage on that day?

[Linden]

not sump!

Belly-pan plugs (the removable rubber bungs)

.... Naked - air cooled - rule ....

[Linden]

Yeah won't be fun if it rains though!!!! - have to stop each lap to tip water out :)

[Kris]

Its not going to rain, dont be silly :)