GROUP BUY -Tech spec tank grips

[SIX36]

I read someone mentioned these as a option to keep scratches and scuffed paint marks from the side of your tank. Plus extra grip, they looked good.
Checked the website US version price was good ranging from $20 to $44 US for my 848, i then contacted the Aust distributor for a AUS price....

$82 dollars......plus shipping
But if we get 5 or more or better still 10 or more here's the deal
Free (registered) postage on 5+ sets, and also deduct 10% from the price on 10+ sets

More info from dealers reply on page 2



http://www.techspec-aus.com.au/
Update....Inners so far
Please list what type you want (Snake skin or High Fusion) and what bike?

Mr848 - Snake skin, 848

Pymm x2 04 & 08 R1 Snake skin??

JasonBW - '08 CBR 1000R, Snake skin????

Synergy - CBR 600Fi, Snake skin???

Belinda - Snake skin

Irish - Snake Skin for K4 GSX-R 750

Seals - x1 '06 FZ6 x1 '06 CBR600

Jolt - Snake skin - 2005 Honda CBR600RR

Lilninja

[Marcus]

Turn over
Overheads

turn over is the biggest problem, the manufacturer probably sells 150 kits per day minimum where the Oz dealer would probably be lucky to sell 50 per week.

Look at it from the same point of view in your profession, and how much they charge for the same service overseas.

Either way, the price is comparable to stomp grips.

[lilninja]

I was lookin at getting a set of these for my bike, Possible Group buy from the US dealer?

[Captain]

By all accounts these are very good ... unlike Stomp Grips, which I hate and took off (alhough others have had success with them).

[SIX36]

I'll be in a group buy from OZ or US???

[Pymm]

support local business. ill take 2 sets!

[jasonbw]

I'd be in it too for a set.

[SIX36]

Ok 4 sets so far poss 5 (lilninja) , i will contact OZ dealer for a group buy i reckon if we can get 10 we'll be on a good thing.
Will update with a reply ASAP.

[senergy]

I hate my stompgrips too so put me down for a set as well.

[Captain]

Do they only come in black?

[SIX36]

Yep black or black

[Captain]

I might be in, depending on price. Are you getting it from the aussie vendor or direct? Sorry not quite sure.
Edited thread title and moved :ayyy:

[senergy]

Whats the real difference between High Fusion and Snake skin.
I'm getting rid of the Stompgrips as they are ripping my leathers, so I don't want something too "sharp".

[SIX36]

Cap, getting from Aus vendor definitely. Thanks

Here is the replay about a group buy, guy sounds tops to deal with and a great sense of humour too...Looks like a good deal to me.

Hi Adam,

Yes certainly, we can do free (registered) postage on 5+ sets, and also deduct 10% from the price on 10+ sets.
I hope that is acceptable, I wouldn't want you to feel you were being "raped and ripped off" .

Just kidding mate, I read a lot of forums for product feedback..........and I saw you removed that portion of your post, which is appreciated.

Let me know what you can arrange with the guys. I am happy to do individual payments also, so you don't have to worry about collecting cash from everyone.

Cheers,

Mark Stiegler
www.techspec-aus.com.au
ph- 0417 598 708

[SIX36]

Whats the real difference between High Fusion and Snake skin.
I'm getting rid of the Stompgrips as they are ripping my leathers, so I don't want something too "sharp".

Have a read here,
http://www.techspec-aus.com.au/overview.html

[Belinda]

I recently bought mine from Madaz in Victoria.

I'm up for another set, the first ones are stuck like glue to the tank!!! and I'm about to change the tank.

Snakeskin is the texture that most people have

[jasonbw]

... at one point there seemed to be an adhesive problem with the fusion, probably not an issue now... Mark?

I'm a definate, esp since the postage was waved or maybe even a discount... excellent!

P.s. Mark, great sense of humour... that's what we like to hear :ayyy:

[Belinda]

And if Mark is reading this......can we get the 'Ice Grip'?

[Irish]

Count me in - Snake Skin for K4 GSX-R 750 :ayyy:

[ozimoto]

do they have clear like the stomp grips.

[Mr Bones]

Yeah I might be up for a set of these will have to check about my bike as it's not on the list.

[Belinda]

I have seen 2 different versions of the Ice Grip, but perhaps the 'black' version was just the clear grip on a black tank :confused1:

Hard to describe, imagine a patchwork of hexagonal sections, each like its been 'brushed' in a different direction.

Seems to only be available in the US.

I cant find a photo anywhere :cursing:

[Ed_GSXR]

Yep sounds good to me. I'm in.

Snakeskin for a 2006 GSXR1000

[ottospunkmeister]

Guys, I ordered some of the snakeskin type for my K4 Gixxer 600 from the Aus distributor (cannot remember what I paid) and he was good to deal with and the goods arrived promptly. The "reusable" glue turned out not to be the case however (it didn't stick to my tank at all well and before you ask yes the surface was immaculately cleaned as per instructions). Didn't fuss me tho' I just used some rubber glue "Fulaprene 303" for the job as I'm not planning on removing them any time soon. Have used them for several months now on both multi-day road rides up north (when I got absolutely pissed on and began to think that Noah may have had a point) and down the snowies plus 4 (I think) track days and my leathers don't seem the worse for wear. I would recommend them, and the glue story may have been my mistake somehow in taking the backing off :dohsmiley:

[Naked Twin]

Put me down for a set.

K7 GSXR750

Let me know payment details and it will be sorted

Thanks
Nickl

[*Oggy*]

I was thinking of getting the square sheets they sell... Hoping to cut out 4 pieces to fit both Blades and save a bit of $$$$

[zRoYz]

Guys, I ordered some of the snakeskin type for my K4 Gixxer 600 from the Aus distributor (cannot remember what I paid) and he was good to deal with and the goods arrived promptly. The "reusable" glue turned out not to be the case however (it didn't stick to my tank at all well and before you ask yes the surface was immaculately cleaned as per instructions). Didn't fuss me tho' I just used some rubber glue "Fulaprene 303" for the job as I'm not planning on removing them any time soon. Have used them for several months now on both multi-day road rides up north (when I got absolutely pissed on and began to think that Noah may have had a point) and down the snowies plus 4 (I think) track days and my leathers don't seem the worse for wear. I would recommend them, and the glue story may have been my mistake somehow in taking the backing off :dohsmiley:

Just a question, did you preheat tank & grip (hair dryer) , this is very important to do.

I just put some on my CBR & they are stuck there like there molded onto tank, there never coming off.

[clarkey]

Just a question, did you preheat tank & grip (hair dryer) , this is very important to do.

I just put some on my CBR & they are stuck there like there molded onto tank, there never coming off.

as are mine...never ever ever:lmao::lmao:

[lilninja]

Im in for a set of snake skin for the 675 Ill also go the tank protector as Im nut sure if the one on my damaged tank will come of real well.

[ottospunkmeister]

Just a question, did you preheat tank & grip (hair dryer) , this is very important to do.

I just put some on my CBR & they are stuck there like there molded onto tank, there never coming off.

No I didn't and don't remember being told to. They are supposed to be "reusable/resealable" with a "unique" glue according to the marketing blurb so if yours aren't coming off then I'm guessing they won't be reusable/resealable either (like mine are now haha)

[Belinda]

When you buy them now they have crossed out the part which states they are reusable........which really sucks for me.

I have tried peeling mine off and they are not moving. I used a hairdryer on both tank and grip pad when installing.

Also mine came with the centre tank protector included for $82. I have the snakeskin and as soon as I bought it I was wishing I had have bought the high fusion, but then I am prone to changing my mind on the little things!

I just think that the fusion would give better grip but, even though its stated somewhere that the fusion is more gentle on leathers, it looks like sand paper :confused1:

[SIX36]

I will get some more info on each style from vendor so people can make a choice...

[zRoYz]

No I didn't and don't remember being told to. They are supposed to be "reusable/resealable" with a "unique" glue according to the marketing blurb so if yours aren't coming off then I'm guessing they won't be reusable/resealable either (like mine are now haha)

They may have had a rethink on that as the fitting instructions now say heat tank. Also when you leave your bike in sun summer don't you think same effect.

[seals]

Im in for 2 sets

2007 FZ6
2006 CBR600RR

The type is pending the more information. cheers :ayyy:

[Pymm]

snake skin on my choices pls!!

[JOLT]

Put me down for
Snake skin - 2005 Honda CBR600RR
Please.

[lilninja]

2 more people and we get a 10% discount! cmon RATS.

[Irish]

2 more people and we get a 10% discount! cmon RATS.

Only one more if you count Pymm's order for 2!

[SIX36]

We already have the 10 - Seals and Pymm have both ordered two sets.

I will speak with the vendor again as we can all place individual orders so it makes it 10x easier than collecting monies. So choice of style is up to you when it comes to ordering.


Some more info on the 2 styles

The high fusion is a much thinner and grippier patch yet still soft rubber so in no way abrasive to leather etc.

Here are some clear pics of the high fusion.

I am looking at going for the high fusion but in a sheet to cut to my own liking and placement.

http://i17.photobucket.com/albums/b57/ZXSIXR/P5300349.jpg

[jasonbw]

Any idea on what the drawback is to the High Fusion? i.e. wont last as long? Seems everyone would go with thinner and grippier but most people go with the snakeskin, wondering why... any thoughts?

[SIX36]

I'm am guessing that in some pics it looks like sand paper and very abrasive.
Mark might be able to chime in with some more info on each style before we all order.

Here's also a updated email response. All i can say is excellent customer service and more Aust dealers need to take a leaf from his book.

Hi Adam,

That's great!

The 'general sheets' are $62 in SnakeSkin and $59 in High Fusion. The same deal will apply to these sets also.

Yes send me a list and once the 10 people have ordered and provided payment details I can amend the price accordingly for you. They can contact me on ph-0417 598 708 directly, on email at info@techspec-aus.com.au or via Pm on the forum.

No need to wait, once ten have ordered, what I will do is I will hold this deal until the end of the month for anyone else on the forum that would like to take it up. They will just need to contact me via PM so I know they are from the forum.

Regards,

Mark Stiegler
www.techspec-aus.com.au
ph- 0417 598 708

[lilninja]

I'm am guessing that in some pics it looks like sand paper and very abrasive.
Mark might be able to chime in with some more info on each style before we all order.

Here's also a updated email response. All i can say is excellent customer service and more Aust dealers need to take a leaf from his book.

Hi Adam,

That's great!

The 'general sheets' are $62 in SnakeSkin and $59 in High Fusion. The same deal will apply to these sets also.

Yes send me a list and once the 10 people have ordered and provided payment details I can amend the price accordingly for you. They can contact me on ph-0417 598 708 directly, on email at info@techspec-aus.com.au or via Pm on the forum.

No need to wait, once ten have ordered, what I will do is I will hold this deal until the end of the month for anyone else on the forum that would like to take it up. They will just need to contact me via PM so I know they are from the forum.

Regards,

Mark Stiegler
www.techspec-aus.com.au
ph- 0417 598 708

Hey Mate,

Can you add me to the list for a set of high fusion with tankpad for a Triumph Daytona 675.

cheers
Damo

[SIX36]

Hey Mate,

Can you add me to the list for a set of high fusion with tankpad for a Triumph Daytona 675.

cheers
Damo

Done,
I will give Mark a list of the usernames so when you contact him he know its for the Rats group buy and you can order what you what when you order.
:ayyy:

[sixer]

Hi Guys,

I am Mark from TechSpec!

I don't like chiming in with a first post when selling something, but there seems to be some questions I can help with.

-IceGrip is available, but only in a 'General Sheet', it is $59.
-The adhesive is NOT reusable as the problem we had previously was in making the adhesive reusable, it did not stick very well to the tank. We decided it was better to have it stick properly than to have it be reusable.
-Since I have been importing TechSpec, the instructions have always said that it must be applied to a warm tank for best adhesion.
-Snakeskin offers slightly more grip than High Fusion and Ice Grip. I usually recommend SnakeSkin for track/Race bikes and HF or IG for purely road duty.

Also, due to a recent increase in material cost, coupled with continued requests for the side pieces without the centre tank protector, TechSpec USA decided to omit the centre tank protector from the kits and keep the price as it was, rather than increase the price of the kits. What this means is that We have some stock with the centre tank protector included and some without.
If you specifically want the centre tank protector, those kits are 'first in' gets them. If you don't want it, let me know and I will save the kits with it included for someone who wants it.

Looking to do EC ride days on the 24,25 & 26th of July, maybe I can meet some of you guys in person?

Cheers,
Mark

[Belinda]

Hi Mark,

Can you post a photo of the Ice Grip please

[sixer]

Pics of it are here, as usual, pics don't really do it justice...

http://www.techspec-usa.com/images/gen_sheet_sport_big.jpg

and

http://www.techspec-usa.com/images/CBR600,ICE1.jpg

[Marcus]

Wear isnt really an issue, mine are wearing (nearly all gone in some places) but I guess thats what happens when they are working. Its been on for nearly 2 years and you cant really tell unless your looking for it. They all wear, stomps as well.

There is a slight difference in grip between thick and thin. Not that noticable but you feel a little more secured with the thicker stuff and its only really noticable at a fast pace or when your hard on the brakes. Not that noticable on the street. The track bike doesnt have anything and its been mostly fine, im going to give stomps a try just for the fuck of it.

[dazzler]

well im in mate!!!!

some snake skin for a TL1000R no need for a tank pad!!!

mr 848 lemme know the details... and when will delivery be???
i have a T.D sat Whaddaya reckon(tell me i'm dreaming)

[FL07]

Mr 848,

can you put me on the list for a set of snake skin for 04 CBR 600RR?

Thanks,

[sixer]

Hey guys/girls,

All you need to do now is call me direct and place your order. This will save Mr848 having to collect money from everyone, and allow you to pay via cr card.

Once I have received 10 orders I will apply all discounts and start to send your TechSpec out to you.

You can contact me on -
ph- 0417 598 708
email - info@techspec-aus.com.au
or via PM here.

Cheers
Mark

[Pymm]

emaillllll sent!

[Irish]

Thanks Mark

Order sent - hope i sent all the info you need.

cheers

Andrew


Hey guys/girls,

All you need to do now is call me direct and place your order. This will save Mr848 having to collect money from everyone, and allow you to pay via cr card.

Once I have received 10 orders I will apply all discounts and start to send your TechSpec out to you.

You can contact me on -
ph- 0417 598 708
email - info@techspec-aus.com.au
or via PM here.

Cheers
Mark

[sixer]

Well, after much enthusiasm, I have a total of..............

3 orders!

C'mon guys/girls, if everyone is to get the discount then orders need to be placed.

Mark
0417 598 708

[senergy]

Thanks for the reminder, PM sent.

[dazzler]

dog nam it!!!! and dazzler makes 4

well folks too much talk and no action!!!!!

just spoke to Mark, took me all of 1:43sec on the phone to order them...

so RING HIM much much easier....

[Belinda]

I have paid! Come on slackers.....:spank:

[JOLT]

Done :ayyy:

[spotcom]

I'm in. Good find, Mr 848. I think I'll go with the same as you've ordered.

PM on its way, sixer. And hopefully I might see you at EC - have got withdrawal symptoms, so am going to look at a date in late July - perhaps one of those you've mentioned.

[jasonbw]

Lets make it easier, post up the bank details to transfer funds, well use username as reference.

[sixer]

Lets make it easier, post up the bank details to transfer funds, well use username as reference.
Mate, PM me your number and I will call you.

[spotcom]

I'm in. Good find, Mr 848. I think I'll go with the same as you've ordered.

PM on its way, sixer.

... and now paid up! That was quick! Jump in guys if you want one, they're a good price! :ayyy:

[Andre]

Im going to ring mark tomorrow to order and pay, snake skin:ayyy:

[dazzler]

pffft ring him now.... money is business and business never sleeps!!!

plus its only 4.15pm in perth:lmao:

[sixer]

:welcome: I'm awake!

[dazzler]

some of us sixer, are born without brains and quite happy about it!!!!:lmao:

[dazzler]

oh, how many we up to now??

[sixer]

We're close, a couple have indicated they will call tomorrow.

If they do I will get all the orders so far, in the mail tomorrow for you all.

[sixer]

All those who have placed orders, your TechSpec is in the mail!

Thankyou!

Anyone who would still like a set, the discount will stand for RATS until the end of June 2009.

Mark

[Andre]

:popcorn:

some of us sixer, are born without brains and quite happy about it!!!!:lmao:

[Pymm]

hey mate, can you add grips and a tank protector for an 09R6 to my order? cheers :)

[sixer]

hey mate, can you add grips and a tank protector for an 09R6 to my order? cheers :)Done.:ayyy:

It will come seperately though as the rest have already been sent.

[Pymm]

groovy, cheers :D

[eden.kwok]

Hi just wondering what sorta pricing are we looking at if you get 10 or more takers, is it still $82 with 10% off??

Eden

[Nelso]

Just ordered too, so you can add me to the tally.:ayyy: Have to do it the hard way though as they don't have the cut outs for a ZX9.:ninja:

[sixer]

Hi just wondering what sorta pricing are we looking at if you get 10 or more takers, is it still $82 with 10% off??

Eden

That's correct.

The best price was for 10+ which is where we're at now, until the end of the month.
I rounded them down to $73 for the SnakeSkin with FREE registered mail.

Mark

[eden.kwok]

That's correct.

The best price was for 10+ which is where we're at now, until the end of the month.
I rounded them down to $73 for the SnakeSkin with FREE registered mail.

Mark

thanks mate will let my friend know about this as well :mod_smilie_rockwoot

[mrkotter]

thanks mate will let my friend know about this as well :mod_smilie_rockwoot

I'm down for this, Sixer expect a phone call tomorrow, or pm me if you can be contacted now.

[lilninja]

I put my order in the other day aswell. now all I need is my fairings and my tank to put them on.

[Naked Twin]

Hey great service :ayyy:. Sent an email on Friday with payment details (too lazy to call) and they just arrived at the office by registered post. That is same day service to me when you consider they came from WA.

Thank you, and will happily recommend this guy

Now just have to learn to ride properly to make better use of it.

Nick

[sixer]

No problem Nick.

But I'm a Mexican, not a sandgroper.

[Naked Twin]

No problem Nick.

But I'm a Mexican, not a sandgroper.

Whoops, I assumed if you taking calls at 7pm EST you had to be in WA. Still overnight is still great service, however knowing you're a Mexican will carry a couple of demerits, sorry its just you Mexicans are spreading disease.

Nick

[sixer]

.. however knowing you're a Mexican will carry a couple of demerits, sorry its just you Mexicans are spreading disease.

NickIt's OK, I know it's not about pig flu, you guys are just jealous that we've got Phillip Island,.................I understand:mock:

[Pymm]

well you're just jealous we have....

shit...

mardi gras? NERRR!!

[sixer]

:dohsmiley:

:lmao:

[Andre]

Recieved mine today, what great service,:ayyy: thanks sixer!

[JOLT]

Also got mine today, cheers sixer!

[senergy]

Mine too, won't be going on for a while when I repaint the tank.
Thanks!

[mrkotter]

Got mine this morning. Thanks Mark!

Bump for a good buy

[lilninja]

havent as yet got mine hopefully they will be there this arvo.

[spotcom]

Mine arrived earlier this week. They look good; haven't installed them yet though.

[dazzler]

yip i'll be installing mine when Jace gets his arse round here to do it!!!:lmao::lmao:

oh and to slip on the new stickers too!....shiny stickers:drool:

[James]

yip i'll be installing mine when Jace gets his arse round here to do it!!!:lmao::lmao:

oh and to slip on the new stickers too!....shiny stickers:drool:

:confused1: How can they be hard to install?

[jasonbw]

They not... but the ARE hard to install RIGHT!

You need heat, and a VERY clean surface on your tank.

[dazzler]

there not, but gotta get the stomp grips off first!

plus by the looks of things they are a once (maybe twice) attempt at it before it all goes horribly wrong. And i am definitely a 3-5 attempts kinda guy:lmao:

best to be safe i reckon!!